Vehicle registry
One digital record per vehicle — registration, insurance, technical data and history, always up to date.

FLEET MANAGEMENT
Keep your fleet ready for the road. Bring vehicles, drivers, inspections and maintenance into one digital workflow, with visibility into fuel, mileage and vehicle location.
Request a demoCAPABILITIES
Vehicle registry · Driver documents · Inspections · Fuel & mileage · Service scheduling · Live tracking
One digital record per vehicle — registration, insurance, technical data and history, always up to date.
Track licences, certificates and medical checks per driver, with alerts before anything expires.
Daily digital walk-around checks replace paper forms, with defects flagged straight to the fleet team.
Log fuel and mileage per vehicle and per route, so consumption and cost per kilometre stay visible.
Plan maintenance around mileage and time intervals, and keep vehicles off the road only when planned.
See where every vehicle is, where it's been and how it's being driven — in real time.
CAN-BUS DATA & REAL-TIME ANALYSIS
Modern vehicles already broadcast everything worth knowing over the CAN-BUS. The platform reads that feed directly, so fuel burn, mileage, temperature, battery health and driving behaviour reach the office as they happen — not on the next report.
Illustrative live feed — the signals and thresholds shown follow your own fleet and vehicle mix.
OPTIMUS
VAN-07 · CAN-BUS feed
Signals received continuously
OVERSPEED VIOLATIONS & RELATIONS TRACKING
Connect each movement relation — a journey between two locations — to its route, driver, speed and stops. See where a vehicle exceeded its applicable speed limit, then review the evidence in the context of the full trip.
VEHICLE USAGE & COSTS LOGS
Each vehicle keeps one running log: how it was used and what it cost. Fuel, service, tolls, tires and fines land on the right vehicle the moment they happen — so cost per kilometre, per route and per driver is always current, not a month-end reconstruction.
Illustrative ledger — the categories, budgets and currency shown follow your own fleet and fuel contracts.
October · TRUCK-04 · Route Zenica
DUTY TRAVEL IDENTIFICATION
The platform tells duty travel from private use as the kilometres happen. Relations that match the visit plan are on-duty; everything else is flagged and confirmed by the driver — so the monthly mileage and cost split is finished before month-end, not reconstructed after it.
Illustrative relations — the classification rules and reimbursement rates follow your own duty-travel policy. Each logged relation carries its mileage and an on-duty/private pick, shown as you'd set it in the app.
October · relations classified as they end
DRIVER ASSIGNMENT
The platform pairs drivers with vehicles as the shift starts and keeps every vehicle inside its allowed hours. A tag tap assigns the vehicle, the roster closes the gaps, and a start attempt inside a blocked interval is simply refused.
Illustrative shift — the tag readers, allowed-use windows and alert recipients follow your own fleet rules.
drivers paired to vehicles as the shift starts
COLD CHAIN
Reefer vehicles carry temperature sensors that stream every reading against the load's setpoint. The moment a door stays open or a temperature drifts, the duty supervisor knows — while the load can still be saved.
Temperature sensors in reefer vehicles stream live readings to the platform throughout the day.
Frozen, chilled and fresh cargo each carry their own target range, set per vehicle and per load.
Door-open and temperature excursions alert the duty supervisor while the load can still be saved.
The temperature log stays with the trip, so claims, handovers and audits work from one record.
Illustrative readings — the sensors, setpoints and alert recipients follow your own fleet and cold-chain rules.
live reefer temperatures against each load's setpoint
ZONE MANAGEMENT
Turn depots, customer sites, operating territories and restricted areas into managed zones. Define where vehicles belong, when a rule applies and what should happen as they cross a boundary.
Create circular or polygon boundaries and assign them to vehicles, drivers or fleet groups.
Set entry and exit rules, schedules and notifications for each zone.
Capture arrival, departure and dwell time; flag unexpected movement and route exceptions.
Tie restricted-zone events to alerts or safe engine-control requests, with a traceable event history.
GEO SEARCH
A location question starts with the map. Freely draw around any area, choose the start and end dates, and find which vehicles — and their assigned drivers — were there during that period.
Mark the exact area on the map without creating a permanent zone.
Search historical location records across the period you set, not just the current fleet position.
See the vehicles and assigned drivers present in the area, with recorded arrival and departure times.
Trace presence at customer sites, investigate incidents or verify activity in a specific territory.
LIVE ALERTS VIA EMAIL
Fleet events don’t wait for someone to open a dashboard. OPTIMUS turns live vehicle data and workshop schedules into email alerts, giving the responsible person the context to act while the event is still relevant — a boundary crossed, a CAN-BUS reading out of range, a service interval running out.
Overspeed, zone entry or exit, unusual fuel consumption and CAN-BUS exceptions raise an alert the moment they are detected.
Intervals tracked by distance, engine hours or calendar date, with an alert raised as each one comes due.
Set what matters for each vehicle, zone or operating rule, so alerts follow how your fleet actually runs.
Each alert carries the vehicle, time, location and triggering condition, addressed to whoever needs to act.
Every vehicle carries its own service rules. As the distance, engine hours or calendar allowance runs down, the same alert mechanism reaches the person who books the workshop — what is due, how much is left, and who needs to know.
Engine oil & filters
Due soonDue in 3,995 km
Brake pads & discs
Interval passedOverdue by 1,380 km
Technical inspection
Due soonDue in 13 days
Coolant & belts
On trackDue in 288 h
Illustrative intervals, vehicles and recipients — the same figures would raise the alert in the example above.
AUTOMATED EMAIL REPORTING
Pre-generated email reports put the right fleet information in the right inbox without rebuilding the same report each time. Choose a recurring schedule or let a specific event trigger a report from a predefined template.
Daily, weekly or monthly summaries of vehicle usage, mileage, fuel, operating costs and exceptions.
A report when a journey closes, a duty-travel record is completed or a defined fleet event occurs.
Set the report layout, vehicle scope, reporting period and intended recipient once. Each email is generated with the relevant data.
ONE PLATFORM
Each solution stands on its own and runs on the same data, so the rest of your operation is one step away.

All activity at the client's location, managed in one app.
Explore this solution

Dashboards and reports built on your own operational data.
Explore this solution

Routine approvals, checks and alerts handled automatically.
Explore this solutionLET'S MOVE FORWARD
Request a demo and see what connected operations could look like for your business.